Analisis Stabilitas Lereng Menggunakan Metode Bishop Simplified di Kecamatan Samarinda Utara, Kota Samarinda, Provinsi Kalimantan Timur
DOI:
https://doi.org/10.29303/goescienceed.v7i4.3151Keywords:
Slope Stability, Sandstone, Bishop Simplified Method, Factor Of Safety.Abstract
Settlement development on hilly morphology in North Samarinda District has encouraged slope utilization through cut and fill activities, and a landslide on 12 May 2025 in Lempake Sub-District underscored the necessity of slope stability studies in the area. This study analyzes the stability of two simple sandstone slopes, Slope A and Slope B, in the Bumi Alam Indah Housing Complex, using the Bishop Simplified method. Data were obtained through lithological description, slope geometry measurement, rock physical properties testing, and Schmidt Hammer testing, processed using the Hoek-Brown to Mohr-Coulomb failure criterion to determine the shear strength parameters, cohesion and friction angle. Analysis was conducted under dry and saturated conditions and evaluated against the applicable minimum factor of safety (FoS). Result show that Slope A obtained an FoS of 1.528 (dry) and 1.294 (saturated), while Slope B obtained and FoS of 2.957 (dry) and 2.513 (saturated). Slope A failed meet the minimum safety treshold under saturated conditions due to a higher degree of weathering, whereas Slope B remained stable under both conditions. Modifying the slope angle of Slope A from 70° to 55° increased the FoS to 1.882 (dry) and 1.611 (saturated). Both slopes are interpreted to have the potential for rotational failure.
References
Badan Standardisasi Nasional. (2012). SNI ASTM C805:2012 Tentang Metode Uji Nomor Pantul Palu Beton Keras. Jakarta: Badan Standardisasi Nasional.
Bieniawski, Z. T. (1989). Engineering Rock Mass Classifications: A Complete Manual for Engineers and Geologists In Mining, Civil, And Petroleum Engineering. Wiley.
Bishop, A. W. (1955). The Use of The Slip Circle in The Stability Analysis of Slopes. Géotechnique, 5(1), 7–17.
Hamzah, M., Trides, T., Oktaviani, R., Litha, L., & Juvensius, A. (2025). Studi Kestabilan Lereng Sandstone Dengan Metode Bishop Simplified di Samarinda Ulu, Kalimantan Timur. Venus: Jurnal Publikasi Rumpun Ilmu Teknik, 3(6).
Heriyanto, Putri, R. I., Pasiakan, L. P., & Salim, A. (2019). Geologi dan Analisis Kestabilan Lereng Dengan Menggunakan Metode Bishop Simplified Daerah Tanah Merah Kota Samarinda Provinsi Kalimantan Timur. Jurnal Teknik Geologi: Ilmu Pengetahuan dan Teknologi, 2(1), 29-35.
Hoek, E., & Bray, J. W. (1981). Rock Slope Engineering (3rd ed.). Institution of Mining and Metallurgy.
Kementerian Pekerjaan Umum. (1987). Keputusan Menteri Pekerjaan Umum No. 378/KPTS/1987 Tentang Standar Perencanaan Geoteknik. Jakarta: Kementerian Pekerjaan Umum.
Lisan, A. R. K., & Jamaluddin, J. (2023). Evaluasi Dampak Pemotongan Lereng dan Pengurukan Kembali Untuk Pembuatan Lahan Kaveling Perumahan: Studi Kasus di Kecamatan Imogiri, Kabupaten Bantul, Provinsi Daerah Istimewa Yogyakarta. Jurnal Ecosolum, 12(1),1-15.
Saptono, S., Kramadibrata, S., & Sulistianto, B. (2013). Using The Schmidt Hammer on Rock Mass Characteristic In Sedimentary Rock At Tutupan Coal Mine. Procedia Earth and Planetary Science, 6, 390-395.
Syam, M. A., Heriyanto, H., & Umar, H. (2021). Analisis Kestabilan Lereng Highwall Menggunakan Metode Bishop Simplified pada Pit 13 PT Belayan Internasional Coal Kecamatan Marangkayu Kabupaten Kutai Kartanegara. Jurnal Geocelebes, 5(1), 46–54.
